Technical Bulletin PAGE: 8/58
Model: Taurus-C1 / P1 Date: 21-Oct-11 No.: RD074026
2. Installation
< Operating Environment \ Machine Level>
Description of machine leveling adjustment for M044 was added.
<Main Machine \ Accessories >
Addition of M4x6 screws, change in quantity of M4x8 screws
The covers should be removed before leveling the machines.
Front to rear Less than 5.0 mm (0.2") away from level
Right to left Less than 5.0 mm (0.2") away from level
The machine feet can be rotated to raise and lower each corner of the machine until it is level.
1
2
M044
No. Description Q’ty
17. Screws (M4x6) 0 4
18. Screws (M4x8) 15 11
To Next Page
Loading...
