Roche Diagnostics
G-20
Operator’s Manual · Version 3.4
Index Cedex Bio analyzer
S
safety, A–3
–analyzer covers, A–6
– approved parts, A–8
– biohazardous materials, A–6
–calibration, B–65
– classification, A–5
– cross-contamination, A–9
– data security, A–10
– disposal of analyzer, A–10
– during End of Shift phase, B–84
– during Prepare phase, B–13
– during routine operation, B–5
– electrical, A–5
– electromagnetic devices, A–8
– insoluble contaminants, A–9
– installation, A–7
– ISE operation, F–21
– operation and maintenance, A–6
– operator breaks, A–9
– operator qualifications, A–9
–optical, A–6
– performing ISE maintenance, F–46
– performing QC, B–74
–power supply, A–8
– reagents and working solutions, A–7
–spillages, A–9
–third-party software, A–8
–transport, A–5
–waste, A–7
– when analyzing samples, B–37
– when exchanging external bottles, B–17
– when handling cuvettes, B–30
– when handling external bottles, B–17
– when handling reagents, B–24
– when removing reagent disk, B–95
– when troubleshooting ISE, F–74
– when using the barcode scanner, B–97
–with flags, E–27
–with maintenance actions, D–8
sample area
–cleaning, D–14
–overview, A–44
sample handling, overview, A–32
sample ID, A–33
sample overview, screen, A–88
sample results
–accepting, B–63
– auto accept, B–57
– checking for not accepted, B–88
– deleting, B–102
– printing, B–64
– validating, B–57
– validating if sample on board, B–58
– validating if sample removed, B–59
samples
–analyzing, B–37
– barcodes, A–60
– checking the status, B–49
– handling, A–32
–introduction to handling, A–32
– overview, B–56
– reading barcodes, B–98
– short guide, B–38
– specifications, A–65
sampling stop, A–125
scanners, A–59
scheduling, calibration, B–104
screens
– alarms, A–84
– applications, A–115
– applications list, A–116
– calibration list, A–107
– configuration, A–113
– cuvette status, A–95
– diagnostics, A–120
– display items, overview, A–71
– expanding and collapsing lists, A–74
– export, A–124
– external bottle status, A–99
– extra wash cycles, A–117
– host codes, A–118
– import, A–122
– inventory, A–121
–ISE status, A–97
–keyboards, A–75
– layout, A–70
– Loadlist, A–110
– lot data, A–108
– lot list, A–109
– maintenance, A–114
– messages, A–83, E–5
– navigation, A–72
– orders list, A–101
– QC history, A–105
– QC history graph, A–106
– QC list, A–104
– QC status, A–104
– reagent mixing, A–118, A–119
– reagent status, A–96
– result list, A–102
– sample overview, A–88
– scrolling, A–73
– stopping processing, A–125
–system status, A–98
– test selection, A–91
–test status, A–92
– users, A–123
– worklist, A–111
scrolling, A–73
segments of cuvettes, A–55
To Next Page
Loading...
