Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016 153
FactoryTalk® View ME Software Integration Chapter 5
8. Open the Goto_SafetyInstruction or Goto_GuardIO display and copy your desired GotoDisplay button objects.
Copy InstructionName2 if you are using the CBIM, CPM, CBSSM, or CBCM instructions.
9. Open your system display.
10. Right-click Display and choose Paste.
11. Repeat steps 8
…10 for each safety instruction, Guard I/O, or SmartGuard module in your application.
To Next Page
Loading...