26 Rockwell Automation Publication 2198-RM002A-EN-P - October 2017
Chapter 1 System Replacement Considerations
Accessories
The only drive accessory that is shared between Kinetix 6000 drives and
Kinetix 5700 drives are 2090-CxBM7DF motor cables. Other drive accessories
are similar (line filters and feedback connector kits, for example), but have
different catalog numbers, even though they fulfill the same function. Some
drive accessories are unique to one family or the other (shared-bus connector
kits and line interface modules, for example). To compare all drive accessories
see Tabl e 2
beginning on page 13.
Table 8 - Kinetix 5700 Drive Accessories
Accessory Cat. No. Description
Shared-bus
Connector Kits
2198-TCON-24VDCIN36
2198-xxxx-P-T
2198-BARCON-xxDCAC100
24V input wiring connectors, T-connectors, and bus-bars
for the Kinetix 5700 drive system 24V shared-bus
connection system (optional).
2198-BARCON-xxDC200
2198-KITCON-ENDCAP200
DC-bus links (55, 85, and 100 mm) and end caps for the
DC-bus shared-bus connection system (required and
included with each respective drive module).
Capacitor Module 2198-CAPMOD-2240
Use for energy storage and to extend the DC-bus voltage to
another inverter cluster. Modules are zero-stacked with
servo drives and use the shared-bus connection system to
extend the external DC-bus in applications up to 100 A.
Extension Module 2198-CAPMOD-DCBUS-IO
The extension module, which is paired with a capacitor
module, is used to extend the DC-bus voltage to another
inverter cluster in the Kinetix5700 drive system.
2090-Series Power
and Feedback Cables
2090-CFBM7DF-CEAxxx
Bulletin 2090 motor feedback cables for MP-Series motors
and actuators with Stegmann Hiperface encoders.
2090-CPxM7DF-xxAxxx
Bulletin 2090 motor power/brake cables for MP-Series
motors and actuators.
2090-XXNFMF-Sxx
2090-CFBM7DF-CDAFxx
Bulletin 2090 standard and continuous-flex feedback
cables that include additional conductors for use with
incremental and EnDat encoders.
2090-Series Single
Cables
2090-CSxM1DE-xxAxxx
Bulletin 2090 single cable for motor power, feedback, and
24V DC brake power with Kinetix VP motors. Feedback
conductors are wired to the 2198-KITCON-DSL feedback
connector kit.
2090-CSxM1DG-xxAxxx
Bulletin 2090 single cable for motor power, feedback, and
24V DC brake power with Kinetix VP motors. 2090-
CSxM1DG cables have flying-lead feedback conductors for
connection to a customer-supplied 2198-KITCON-DSL
feedback connector kit.
Communication
Cables
1585J-M8CBJM-x
1585J-M8UBJM-x
1585J-M8CB-x
Ethernet cables are available in standard lengths. Shielded
cable is required to meet EMC specifications.
To Next Page
Loading...
Need help?
General
