Rohde & Schwarz R&S ZVA 8 - Marker Info Field

Screen Elements R&S
®
ZVA/ZVB/ZVT
1145.1084.12 3.14 E-1
• Mkr 1 indicates the maximum (minimum) of the peak.
• Mkr 2 and Mkr 3 indicate the lower and upper band edge where the trace value has decreased
(increased) by a definite Level value.
• Mkr 4 indicates the center of the peak, calculated as the arithmetic mean value of the LBE and
UBE positions.
Marker Info Field
The coordinates of all markers defined in a diagram area are displayed in the info field, which by default
is located in the upper right corner.
The list contains the following information:
• Mkr 1, Mkr2, ... denote the marker numbers.
• Markers are displayed with the same color as the associated trace.
• The marker coordinates are expressed in one of the marker formats selected via Marker Format.
The formats of the markers assigned to a trace are independent of each other and of the trace
format settings.
• The active marker has a dot placed in front of the marker line.
• A ∆ sign placed in front of the marker line indicates that the marker is in Delta Mode.
Customizing the marker info field
To change the position, appearance or contents of the marker info field use one of the following
methods:
• Double-click the info field to open the Mkr Properties dialog with extended settings for all markers
of the active trace.
• Right-click the info field to open a context menu providing frequently used marker settings.
• To change the position of the marker info field, select Movable Marker Info from the context
menu. Drag-and-drop the info field to any position in the active diagram area.
• To change the format of the active marker, select Mkr Format.
• To express the coordinates of the active marker relative to the reference marker, activate the
Delta Mode.
For more information: Show Info Table
In addition to the marker info field, the analyzer provides an info table with extended marker
information.