Rohde & Schwarz R&S ZVA 8 - New; Close; Print; Print Dialog

R&S
®
ZVA/ZVB/ZVT File Menu
1145.1084.12 4.5 E-6
New
Creates a new setup and opens a new setup window. The new setup is named Setup<n> where <n> is
the current number for all created setups.
To open an existing setup, select File – Open / Recall. To rename a setup, use File – Save As.
Remote control:
MEMory:DEFine "<setup_name>"
Close
Closes an opened setup window. The analyzer suggests to save changes to the setup before closing it.
If a setup is closed without saving, all changes made since the last time it was saved are lost.
Remote control:
MEMory:DELete[:NAME] "<setup_name>"
Print
Prints the active setup. This command opens a standard Windows™ Print dialog box to, specify the
range of pages to be printed, the number of copies, the destination printer, and other printer setup
options.
Remote control:
The commands in the HCOPy...
system provide the printer settings.
HCOPY[:IMMediate] initiates the print.
Print Dialog
Provides options to specify how the setup should be printed. Print is opened by means of the File –
Print... command.