Front Panel Tour R&S
®
ZVA
1145.1090.62 1.6 E-1
• In character input fields, the G/n, M/
µ
, k/m keys enter the letters G, M, K,
respectively. x1 is equivalent to OK ENTER. It confirms the previous entry
and deactivates the input field (closes the input box).
BACK deletes the last character before the cursor position or the selected
character sequence. If an entire numeric value is selected, BACK moves the
cursor in front of the first digit.
Rotary Knob
The rotary knob increases and decreases numerical values, scrolls within lists,
activates controls and confirms entries.
Turning or pressing the rotary knob is equivalent to the action of the
Cursor Up and Cursor Down keys or the ENTER key in the NAVIGATION
keypad.
STEP SIZE opens an input box to select the steps (in units of the current physical
parameter) between two consecutive values if the rotary knob is turned to increase
or decrease numeric values. See Data Entry in Chapter 3.
STANDBY Key
The STANDBY toggle switch is located in the bottom left corner of the front panel.
The key serves two main purposes:
• Toggle between standby and ready state
• Shut down the instrument.
To Next Page
Loading...
