R&S
®
ZVA/ZVB/ZVT Screen Elements
1145.1084.12 3.15 E-1
The table is hidden by default. To display the table double-click the marker info field to open the Marker
Properties dialog.
Context menu of the marker info field
A right mouse click on the marker info field opens a context menu:
Movable Marker Info allows the marker info field to be placed to any position in the diagram area. The
remaining settings correspond to the most common commands in the Trace – Marker and Trace –
Search menus.
Channel Settings
The main properties of all channels assigned to the traces in the diagram area are displayed in the
channel list below the diagram.
Each line in the channel list describes a single channel. The channel of the active trace is highlighted.
The lines are divided into several sections with the following contents (from left to right):
• Channel name indicates the current channel name. The default names for new channels are
Ch<n> where <n> is a current number. Right-click the section and call the Channel Manager
from the context menu to change the channel name.
• Start value of the sweep indicates the lowest value of the sweep variable (e.g. the lowest
frequency measured), corresponding to the left edge of the Cartesian diagram.
• Color legend shows the display color of all traces assigned to the channel. The colors are
different, so the number of colors is equal to the numbers of traces assigned to the channel.
• Additional stimulus parameter shows either the power of the internal signal source (for
frequency sweeps and time sweeps) or the CW frequency (for power sweeps).
• Stop value of the sweep indicates the highest value of the sweep variable (e.g. the highest
frequency measured), corresponding to the right edge of the Cartesian diagram.
Right-click any of the sections in the trace list (except Color legend) to open a context menu and
access the most common tasks related to the section.
Context menus of the channel list
A right mouse click on the channel name, the sweep range, and the additional parameter section of the
channel list opens the following context menus, respectively:
To Next Page
Loading...
