R&S
®
ZVA Front Panel Tour
1145.1090.62 1.5 E-1
OK ENTER is used to:
• Activate the selected active control element, e.g. a button in a dialog or
a link in the Help
• Confirm selections and entries made and close dialogs
OK ENTER is equivalent to pressing the rotary knob or the OK ENTER key
in the DATA ENTRY keypad.
The Checkmark (= Space) key switches a checkmark control in a dialog on
or off.
The CANCEL ESC key is used to:
• Close dialogs without activating the entries made (equivalent to the
Close button)
• Close the Help
CANCEL ESC is equivalent to the CANCEL ESC key in the DATA ENTRY
keypad.
Data Entry Keys
The keys in the DATA ENTRY keypad are used to enter numbers and units.
The ESC CANCEL and OK ENTER keys are equivalent to the
corresponding keys in the NAVIGATION keypad.
The remaining DATA ENTRY keys are only enabled while the cursor is
placed on a data input field in a dialog or in the Help navigation pane.
...
The keys 0 to 9 enter the corresponding numbers.
The function of the . and – keys depends on the data type of the active input
field:
• In numeric input fields, the keys enter the decimal point and change the
sign of the entered numeric value. Multiple decimal points are not allowed;
pressing – for a second time cancels the effect of the first entry.
• In character input fields, the keys enter a dot and a hyphen, respectively.
Both entries can be repeated as often as desired.
...
The function of the four unit keys depends on the data type of the active input
field; see Data Entry section in Chapter 3.
• In numeric input fields, the G/n, M/
µ
, k/m or x1 keys multiply the entered
value with factors of 10
(-)9
, 10
(-)6
, 10
(-)3
or 1 and add the appropriate
physical unit of the entered numeric value. x1 is equivalent to OK ENTER.
It confirms the previous entry and deactivates the input field (closes the
input box).
To Next Page
Loading...
