Rohde & Schwarz R&S ZVA 8 - Split Manager

R&S
®
ZVA/ZVB/ZVT Display Menu
1145.1084.12 4.243 E-6
To vary the size and position of the diagram areas, drag and drop the separating
frames, use the Split Manager or the functions of the Window menu.
Remote control:
No command, display configuration only.
Split Manager
Opens a dialog to arrange the diagram areas in the active window.
• Split Mode provides a drow-down list to select alternative display schemes for the diagram
areas (see examples for split modes below).
• Number of Diagram Areas indicates the total number of diagram areas. Increasing/decreasing
the number creates new diagram areas or deletes diagram areas.
Examples for split modes
• The following examples were obtained with 3 diagram areas, each with 1 trace.
Lineup