Rohde & Schwarz R&S ZVA 8 - Rear Panel Connectors; Aux; Lan1; Lan 2; Usb

Rear Panel Connectors R&S
®
ZVA/ZVB/ZVT
1145.1084.12 8.4 E-3
Rear Panel Connectors
AUX
Coaxial bidirectional auxiliary connector that can be wired as needed. The AUX connector is not fitted
on standard instruments.
Pin No. Name Input (I) or
Output (O) or
Bidirectional (B)
Voltage Range Function
Center conductor AUX I or O or B See data sheet Can be wired as needed
Outer conductor GNDA – 0 V Analog ground
LAN1 / LAN 2
8-pin connector RJ-45 used to connect the analyzer to a Local Area Network (LAN). The pin
assignment of the RF-45 connector supports category 5 UTP/STP (Unshielded/Shielded Twisted Pair)
cables.
Pin No. Name Input (I) or
Output (O)
Voltage Range
1 INPUT RECEIVE DATA (+) I +2.5 V
2 INPUT RECEIVE DATA (–) I –2.5 V
3 OUTPUT TRANSMIT DATA (+) O +2.5 V
6 OUTPUT TRANSMIT DATA (–) O –2.5 V
The other pins are not used.
USB
Double Universal Serial Bus connector of type A (master USB), used to connect e.g a keyboard, mouse
or other pointing devices, a printer or an external storage device (USB stick, CD-ROM drive etc.).