Rohde & Schwarz R&S ZVA 8 - Window Menu; New

Window Menu R&S
®
ZVA/ZVB/ZVT
1145.1084.12 4.266 E-6
Window Menu
The Window menu provides standard Windows™ functions to arrange different windows on the screen.
Windows
A window is a rectangular portion of the screen showing all diagram areas of a particular setup.
Windows are limited by a blue frame with several icons. The analyzer uses standard windows provided
by the operating system.
• A window can show a practically unlimited number of diagram areas.
• The icons on the frame of the window are used to minimize, maximize or close windows.
• The functions of the Windows menu are used to arrange windows automatically and select a
particular window.
• New windows with new setups are created using the New command.
The contents of the windows are explained in section Display Menu.
The Window menu contains the following functions:
• New creates a new setup and opens a new setup window.
• Close closes an opened setup window.
• Cascade arranges all opened windows in an overlapped fashion.
• Tile arranges all opened windows in non-overlapped tiles.
• Maximize maximizes the active window to occupy the whole screen.
• 1 Set<n>.zvx... activates a specific window with a specific setup
New
Creates a new setup and opens a new setup window. The new setup is named Setup<n> where <n> is
the current number for all created setups.
This command is equivalent to File – New. To open an existing setup, select File – Open / Recall.
To rename a setup, use File – Save As.
Remote control:
MEMory:DEFine "<setup_name>"