Trace Menu R&S
®
ZVA/ZVB/ZVT
1145.1084.12 4.50 E-6
• The two radio buttons qualify whether the traces in the table are sorted in ascending or
descending order, according to the property selected in the pull-down list.
Remote control:
No command, display configuration only.
Trace Funct
The Trace Funct(ions) store traces to the memory and perform mathematical operations on traces
Refer to section Trace Types in the System Overview chapter to learn more about data traces,
memory traces, and mathematical traces.
• Data -> Mem stores the active data trace as a memory trace.
• Math = Data/Mem activates the mathematical mode where the data trace is divided by the
memory trace.
• Show Data shows or hides the active data trace.
• Show Mem shows or hides the active memory trace.
• More Mem opens a submenu to store traces as memory traces, show or hide traces.
• Math = User Def activates the mathematical mode with a user-defined relation between traces.
• User Def Math... opens a dialog to define a mathematical relation between traces.
• Transform opens a submenu with the time domain transformation functions (with option ZVAB-
K2, Time Domain).
• Trace Statistics opens a submenu to evaluate statistical and phase information of the trace.
To Next Page
Loading...
