Windows XP Embedded R&S
®
ZVT
1300.0045.62 1.16 E-1
Remote Desktop Connection
Remote Desktop is a Windows application which can be used to access and control the analyzer from a
remote computer through a LAN connection. While the measurement is running, the analyzer screen
contents are displayed on the remote computer, and Remote Desktop provides access to all of the
applications, files, and network resources of the analyzer.
To set up a Remote Desktop connection
1. Connect the analyzer to a LAN and determine its IP address; see Remote Control in a LAN.
2. Set up your remote computer (integrated in the LAN) to use Remote Desktop and create the
Remote Desktop connection to the analyzer.
For detailed information about Remote Desktop and the connection refer to the Windows XP
Embedded Help.
Windows XP Embedded
The analyzer is equipped with a Windows XP Embedded operating system which has been configured
according to the instrument's features and needs. Changes in the system configuration can be
necessary in order to
• Establish a LAN connection
• Customize the properties of the external accessories connected to the analyzer
• Call up additional software tools
Attention!
The operating system is adapted to the network analyzer. To avoid impairment of
instrument functions, only change the settings described in this manual. Existing
software must be modified only with update software released by Rohde & Schwarz.
Likewise, only programs authorized by Rohde & Schwarz for use on the instrument
must be executed.
The Start menu of the operating system is accessed by pressing the Windows key on the external
keyboard or on the hardkey bar of the GUI. All necessary settings can be accessed from the Start
menu, in particular from the Control Panel.
To Next Page
Loading...
