Rohde & Schwarz R&S ZVA 8 - Saving and Printing Data

R&S
®
ZVA/ZVB/ZVT Reflection Measurements
1145.1084.12 2.7 E-1
Refer to section Display Formats and Diagram Types in
Chapter 3 to learn more about the diagram properties.
Saving and Printing Data
The analyzer provides standard functions for saving measurement settings and for printing the results.
You can use these functions as if you were working on a standard PC. Moreover you can export your
trace data to an ASCII file and reuse it in a later session or in an external application.
Data transfer is made easier if external accessories are connected to the analyzer or if the
instrument is integrated into a LAN. Refer to sections External Accessories and Remote Control in a
LAN to obtain information about the necessary steps.
1. Press TRACE FUNCT and activate Import/Export Data – Export.
2. In the Export Data dialog opened, select a file location, format and name and
activate Save.
The active trace data are written to an ASCII file.
Refer to section Trace File Formats to learn more about trace files and
their use.
3. Press PRINT in the SYSTEM keypad and select Print Now to create a hardcopy of
your diagram.
4. Select Print to File... or Print to Clipboard to copy the diagram to a file or an
external application.