Connecting External Accessories R&S
®
ZVB
1145.1055.62 1.16 E-2
Use the Start – Control Panel – Keyboard or Regional and Language Options menu of Windows
XP to configure the keyboard properties. To access Windows XP, press the Windows key on the
external keyboard or on the front panel.
Operating the analyzer does not require a keyboard. You can access all essential functions
using the keys on the front panel. In combination with a mouse, the front panel keys provide
access to all instrument functions.
Connecting a Printer
A printer can be connected to one of the Universal Serial Bus connectors on the front panel or on the
rear panel (double USB connectors).
It is safe to connect or disconnect the printer during the measurement. When printing a copy (File –
Print), the analyzer checks whether a printer is connected and turned on and whether the appropriate
printer driver is installed. If required, printer driver installation is initiated using Windows XP's Add
Printer Wizard. The wizard is self-explanatory. A printer driver needs to be installed only once, even
though the printer may be temporarily removed from the analyzer.
Printer driver installation
A great variety of printer drivers is available on the analyzer. To obtain the complete list, access
Windows XP (press the Windows key) and open the Add Printer Wizard in the Start – Control Panel –
Printer and Faxes menu.
You can load updated and improved driver versions or new drivers from an installation disk, USB
memory stick or another external storage medium. Alternatively, if the analyzer is integrated in a
network, you can install driver data stored in a network directory. In either case, use the Add Printer
Wizard to complete the installation.
Use the Page Setup dialog or the Start – Control Panel – Printers and Faxes menu of Windows
XP to configure the printer properties. To access Windows XP, press the Windows key on the external
keyboard or on the front panel.
To Next Page
Loading...
