Rohde & Schwarz R&S ZVA 8 - Dual Split; Triple Split

R&S
®
ZVA/ZVB/ZVT Display Menu
1145.1084.12 4.241 E-6
A double-click into any point in the diagram area is equivalent to the Maximize
function. To view all traces in a common, maximized diagram area, select Overlay all.
Remote control:
D
ISPlay:WINDow<Wnd>:MAXimize ON | OFF
Dual Split
Splits the window horizontally into two diagram areas and distributes the traces among the two areas,
separating diagrams with different trace Format and Channel settings (e.g. Cartesian and polar
diagrams).
If only one trace is available, the lower diagram area is empty and displays No Trace.
To vary the size and position of the two diagram areas, drag and drop the separating
frames, use the Split Manager or the functions of the Window menu.
Remote control:
No command, display configuration only.
Triple Split
Splits the active window into three diagram areas and distributes the traces among the three areas,
separating diagrams with different trace Format and Channel settings (e.g. Cartesian and polar
diagrams).