R&S
®
ZVA/ZVB/ZVT Display Menu
1145.1084.12 4.237 E-6
The analyzer provides several tools to activate a diagram area:
• A left mouse click on a point in the diagram activates the diagram including the last active trace
in the diagram.
• Next Diag. Area and Previous Diag. Area activate the next/previous diagram including the last
a
ctive trace in the diagram.
• A left mouse click on a trace list activates the trace including the corresponding diagram.
• Some of the functions of the Trace – Traces menu activate a particular trace including the
corresponding diagram.
• Next Diag. Area selects the next diagram area as the active diagram area (disabled if only one
diagram area is defined).
• Select Diag. Area opens a box to select an arbitrary diagram area as the active diagram area
(disabled if only one diagram area is defined).
• Add Diag Area + Trace creates a new diagram area with a new trace.
• Delete Diag. Area deletes the active diagram area.
• Overlay all places all traces in a single diagram area which occupies the whole window.
• Split all splits the active window into as many diagram areas as there are traces and assigns a
single trace to each area.
• Maximize maximizes the active diagram area to occupy the whole window.
• Dual Split splits the active window into two diagram areas and distributes the traces among the
two areas.
• Triple Split splits the active window into two diagram areas and distributes the traces among the
two areas.
• Quad Split splits the active window into two diagram areas and distributes the traces among the
two areas.
• Split Manager opens a dialog to arrange the diagram areas in the active window.
• Title opens a dialog to define a title and display it in one of the diagram areas.
To Next Page
Loading...
