Spectrum Analysis
R&S
®
Scope Rider RTH
129User Manual 1326.1578.02 ─ 12
Set to Screen
Sets the cursors to a default position on the screen. This is helpful if the cursors have
disappeared from the display or need to be moved for a larger distance.
Remote command:
SPECtrum:CURSor<m>:SCReen on page 362
6.2.8 Export Spectrum Data to File
Access: [MODE] = "Spectrum" > [FILE] > "Spectrum"
The results of a spectrum measurement can be exported similarly to a waveform (see
also Chapter 12, "Documenting Results", on page 265). The OneTouch functionality is
also available (see Chapter 12.6, "Quick Save with OneTouch", on page 277).
For details on the export file format, see Chapter 6.2.9, "Export File Format for Spec-
trum Results", on page 130.
File Format
Selects the format of the export file.
"CSV"
Comma-separated values (CSV) text file, the waveform is stored in a
table. The columns are separated by commas or another delimiter.
For each sample, one line is written. Values are listed in scientific
notation. You can convert the comma-separated text to columns.
"Compressed
CSV"
ZIP file that contains one or more CSV files. This format reduces the
file size.
Remote command:
SPECtrum:EXPort:NAME on page 366
Save Spectrum, Save Spectrum As
Save the spectrum results.
"Save"
Saves the file in the defined "Directory" using the autonaming pattern.
Spectrum Mode (Option R&S RTH-K18)
To Next Page
Loading...
