Getting Started
R&S
®
Scope Rider RTH
21User Manual 1326.1578.02 ─ 12
USB type B connector (mini USB)
Mini USB connector to connect a computer for remote control of the instrument.
Probe compensation
Probe compensation terminal to support adjustment of passive probes to the oscillo-
scope channel.
Logic probe connector
Input for the logic probe R&S RT-ZL04. Logic analysis requires Mixed Signal Option
R&S RTH-B1, which includes the logic probe R&S RT-ZL04.
Risk of electrical shock - no CAT rating for MSO measurements
The logic probe R&S RT-ZL04 is not rated for any measurement category. To avoid
electrical shock or personal injury, and to prevent material damage, make sure that the
ground clips of the R&S RT-ZL04 are connected to protective earth on the DUT.
2.3.4 Left View
1
= DC input
2 = Kensington lock slot
DC input
Connector for the power adapter to charge the battery.
Kensington lock slot
The Kensington lock is used to secure the instrument against theft.
Instrument Tour
To Next Page
Loading...
