Rohde & Schwarz Scope Rider RTH1004 - Page 275

Documenting Results
R&S
®
Scope Rider RTH
275User Manual 1326.1578.02 ─ 12
Figure 12-3: Waveform data file with two voltage values per sample, acquisition mode is envelope
12.4.3.2 Header Data
The header lines contain the following properties:
Value Description
Acquisition Time Stamp Time of the waveform acquisition
Waveform Type ANALOG for analog channel signals and math waveforms, DIGITAL for logic
signals
Acquisition Mode Acquisition mode that has been used: sample, peak detect, high resolution,
average, envelope. If peak detect or envelope is set, two values (minimum and
maximum) are written for each sample.
Only for analog channels.
Horizontal Unit s, second
Horizontal Scale In s/div
Horizontal Position Distance of the trigger point from the reference point.
Reference Point Position in the diagram: left = 10%, middle = 50%, and right = 90%
Sample Interval Time between two samples
Waveforms