Documenting Results
R&S
®
Scope Rider RTH
276User Manual 1326.1578.02 ─ 12
Value Description
Record Length Number of samples, corresponds to the number of data lines in the file
Probe Setting Attenuation factor of the connected probe, only for analog channels.
Vertical Unit V or A
Vertical Scale In V/div or A/div, only for analog channels and math waveforms.
Vertical Position In divisions, only for analog channels
Vertical Offset In V or A, only for analog channels
Threshold Only for digital channels
History Index Only for history export, see Chapter 4.7.4, "Exporting History Data",
on page 100
History Time Stamp
12.4.3.3 Converting CSV to Excel Files
If you open an exported CSV file in Excel or another spreadsheet, all data is written in
one column. The value delimiter is usually a comma, but you can select another delim-
iter in the export settings. As an example, the following procedure describes text con-
version to columns in Excel. Other spreadsheet applications provide similar features.
Make sure to select the correct text delimiter, decimal separator and thousands sepa-
rator.
1. Open the CSV file in Excel.
2. Click the column header "A" to select all data.
3. On the "Data" ribbon, click "Text to Columns".
4. Select the data type "Delimited".
Click "Next".
5. Select the delimiter that you have used in the export file (usually a comma).
Click "Next".
6. Click "Advanced".
7. Select the point as decimal separator and the comma as thousands separator.
8. Click "Finish".
Waveforms
To Next Page
Loading...
