Rohde & Schwarz Scope Rider RTH1004 - Page 415

Remote Control Commands
R&S
®
Scope Rider RTH
415User Manual 1326.1578.02 ─ 12
Return values:
<HasData> 1 | 0
1: data available
0: slot is empty
*RST: 0
Usage: Query only
Firmware/Software: FW 1.60 and higher
LOGGer:SLOT:SLOT<m>:STARt? <Year>, <Month>, <Day>, <Hour>, <Min>, <Sec>
Returns the start time of the logger record. If the slot is empty, the command returns an
error.
Suffix:
<m>
.
1..10
Slot number
Query parameters:
<Year>, <Month>,
<Day>, <Hour>,
<Min>, <Sec>,
<ZSec>
Date and time of the slot start
Usage: Query only
Firmware/Software: FW 1.60 and higher
LOGGer:SLOT:LOAD
Loads the logger record of a slot, and activates the slot. The slot is defined using
LOGGer:SLOT:CURRent.
Usage:
Event
LOGGer:SLOT:CLEar
Deletes the log data of a slot. The slot is defined using LOGGer:SLOT:CURRent.
Only possible while logging is stopped.
Usage:
Event
LOGGer:ACLR
Deletes the log data of all slots. Only possible while logging is stopped.
Usage:
Event
Data Logging