Rohde & Schwarz Scope Rider RTH1004 - Page 433

Remote Control Commands
R&S
®
Scope Rider RTH
433User Manual 1326.1578.02 ─ 12
Usage: Query only
BUS:I2C:FRAMe<m>:ASTart?
Returns the start time of the address for the indicated frame.
Suffix:
<m>
.
*
Return values:
<AddressStartTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:BCOunt?
Returns the number of bytes in the specified frame.
Suffix:
<m>
.
*
Return values:
<Count> Byte count
Usage: Query only
BUS:I2C:FRAMe<m>:BYTE<n>:ACCess?
Returns the acknowledge bit value of the specified data byte.
Suffix:
<m>
.
*
<n> *
Return values:
<AckBit> INComplete | ACK | NACK | EITHer
*RST: INComplete
Usage: Query only
BUS:I2C:FRAMe<m>:BYTE<n>:ACKStart?
Returns the start time of the acknowledge bit of the specified byte.
Suffix:
<m>
.
*
<n> *
Protocol Analysis