Rohde & Schwarz Scope Rider RTH1004 - Page 435

Remote Control Commands
R&S
®
Scope Rider RTH
435User Manual 1326.1578.02 ─ 12
BUS:I2C:FRAMe<m>:DATA?
Returns the data words of the specified frame.
Suffix:
<m>
.
*
Parameters:
<Data> Comma-separated list of values.
Usage: Query only
BUS:I2C:FRAMe<m>:RWBStart?
Returns the start time of the R/W bit.
Suffix:
<m>
.
*
Return values:
<RWBitStartTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:STARt?
Returns the start time of the specified frame.
Suffix:
<m>
.
*
Return values:
<StartTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:I2C:FRAMe<m>:STATus?
Returns the overall state of the frame.
Suffix:
<m>
.
*
Return values:
<Status> OK | VOID | ADNack | WRNack | SPERror | STERror |
INSufficient
OK
The frame is valid.
Protocol Analysis