Rohde & Schwarz Scope Rider RTH1004 - Page 460

Remote Control Commands
R&S
®
Scope Rider RTH
460User Manual 1326.1578.02 ─ 12
Suffix:
<m>
.
*
Return values:
<BitStuffErrorPos> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS:CAN:FRAMe<m>:BYTE<n>:STATe?
Returns the state of the specified byte.
Suffix:
<m>
.
*
<n> *
Return values:
<ByteState> OK | UNDF
UNDF: Undefined
*RST: OK
Usage: Query only
BUS:CAN:FRAMe<m>:BYTE<n>:VALue?
Returns the value of the specified byte.
Suffix:
<m>
.
*
<n> *
Return values:
<ByteValue> Range: 0 to 255
*RST: 0
Usage: Query only
BUS:CAN:FRAMe<m>:CSValue?
Returns the CRC sequence value of the selected frame.
Suffix:
<m>
.
*
Return values:
<ChecksumValue> Range: 0 to 2097151
*RST: 0
Usage: Query only
Protocol Analysis