Rohde & Schwarz Scope Rider RTH1004 - Page 459

Remote Control Commands
R&S
®
Scope Rider RTH
459User Manual 1326.1578.02 ─ 12
The byte suffix <n> selects the byte index for which the result is queried.
BUS:CAN:FCOunt?........................................................................................................459
BUS:CAN:FRAMe<m>:ACKValue?.................................................................................. 459
BUS:CAN:FRAMe<m>:BSEPosition?...............................................................................459
BUS:CAN:FRAMe<m>:BYTE<n>:STATe?.........................................................................460
BUS:CAN:FRAMe<m>:BYTE<n>:VALue?........................................................................ 460
BUS:CAN:FRAMe<m>:CSValue?.................................................................................... 460
BUS:CAN:FRAMe<m>:DATA?.........................................................................................461
BUS:CAN:FRAMe<m>:DLCValue?.................................................................................. 461
BUS:CAN:FRAMe<m>:ACKState?...................................................................................461
BUS:CAN:FRAMe<m>:CSSTate?.................................................................................... 461
BUS:CAN:FRAMe<m>:DLCState?...................................................................................461
BUS:CAN:FRAMe<m>:IDSTate?..................................................................................... 461
BUS:CAN:FRAMe<m>:IDTYpe?...................................................................................... 462
BUS:CAN:FRAMe<m>:IDValue?......................................................................................462
BUS:CAN:FRAMe<m>:NDBYtes?................................................................................... 462
BUS:CAN:FRAMe<m>:SDATa?.......................................................................................463
BUS:CAN:FRAMe<m>:STARt?....................................................................................... 463
BUS:CAN:FRAMe<m>:STOP?........................................................................................463
BUS:CAN:FDATa:FRAMe<m>:STANdard?....................................................................... 463
BUS:CAN:FRAMe<m>:STATus?......................................................................................463
BUS:CAN:FRAMe<m>:SYMBol?..................................................................................... 464
BUS:CAN:FRAMe<m>:TYPE?........................................................................................ 464
BUS:CAN:FCOunt?
Returns the number of decoded frames in the acquisition.
Return values:
<Count> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS:CAN:FRAMe<m>:ACKValue?
Returns the value of the acknowledge slot for the selected frame.
Suffix:
<m>
.
*
Return values:
<AckValue> Range: 0 to 1
*RST: 0
Usage: Query only
BUS:CAN:FRAMe<m>:BSEPosition?
Returns the location of a bit stuffing error.
Protocol Analysis