R&S SMB Switchover to Remote Control
1407.0806.32 5.7 E-2
Starting the Measurement & Automation program for remote control of the Signal Generator
! Start program on the controller
! In the Configuration window, open Instruments and Interfaces and select R&S SM (= Alias)
under VISA Ethernet Devices.
! Open the menu by clicking Open VISA Session with the right mouse key.
! On the viWrite tab under Basic I/O, commands can be sent to the instrument; instrument responses
are displayed on the viRead tab
(for further program operation refer to the online help of the program).
To Next Page
Loading...
