Rohde & Schwarz SMB 100a - Legend for Rear Panel View

R&S SMB Legend for Rear Panel View
1407.0812.62 1.9 E-2
Legend for Rear Panel View
This section gives an overview of connectors on the rear panel of the R&S SMB. Each connector is
briefly described and a reference is given to the chapters containing detailed information. For technical
data of the connectors refer to the data sheet.
Fig. 1-2 Rear panel view
1 Fuses
Fuses.
The R&S SMB is fully fused by two
fuses IEC127-T3.15H/250 V.
See chapter 1, section
"Power Fuses" and
data sheet
2 AC supply
AC supply connector.
When the R&S SMB is connected to
the AC supply, it automatically sets
itself to the correct range for the
applied voltage (range: see type
label). There is no need to set the
voltage manually or change fuses.
Power switch.
See chapter 1, section
"Connecting the
R&S SMB to the AC
Supply" and data
sheet