Legend for Rear Panel View R&S SMB
1407.0812.62 1.10 E-2
3 USB interface type B
USB IN USB (universal serial bus) interface of
type B (device) for remote control of
signal generator.
See chapter 8, section
"USB Connection
(USB and USB IN)"
4 USB connectors type A
USB USB (universal serial bus) interfaces
of type A (host).
– Connection of peripherals such
as mouse and keyboard
– Connection of memory stick for
firmware update
See chapter 1, section
"Connecting an
External Keyboard and
Mouse" and chapter 8,
section "USB
Connection (USB and
USB IN)"
5 LAN interface
LAN Ethernet interface
– Remote control of signal
generator
– Remote access to graphical user
interface of signal generator.
See data sheet and
chapter 1, section
"Connecting the
R&S SMB to a Network
(LAN)", chapter 8,
section "LAN
Connector" and chapter
5, section "Remote
Control via LAN
Interface"
6 IEC/IEEE-bus connector
IEC 625/IEEE 488
IEC-bus (IEEE 488) interface for
remote control of the R&S SMB.
See data sheet and
chapter 8, section
"IEC/IEEE Bus
Interface"
7 Inputs for analog modulation signals (option R&S SMB-B5)
STEREO R / L
Inputs for analog stereo modulation
signals. External modulation sources
or the internal LF generator can be
used (stereo modulation is available
with option R&S SMB-B5).
8 Input for digital stereo signals (option R&S SMB-B5)
S/P DIF
Input for digital stereo signals (stereo
modulation is available with option
R&S SMB-B5).
To Next Page
Loading...
