Rohde & Schwarz SMB 100a - Selecting a Unit - Setting Parameters

Setting Parameters R&S SMB
1407.0812.62 3.14 E-2
• New entry:
The entry is started by clicking an alphanumeric key.
Function Front panel PC keyboard Mouse
Enters a new value Press an alphanumeric key. Press a letter key or a
numeric key.
-
Edits a value Click the rotary knob. Select the
desired numeric digit with the
rotary knob and mark it by clicking
the button. Change the number
using the keypad.
Press the Enter key. Select
the desired numeric digit
using the left/right arrow
keys. Enter new value using
the keyboard.
Click the desired position to
set the cursor. Change the
value using the keyboard.
Varies a value Click the rotary knob. Select the
desired numeric digit with the
rotary knob and mark it by clicking
the button. Vary the number using
the rotary knob.
Press the Enter key. Select
the desired numeric digit
using the left/right arrow
keys. Vary the number using
the up/down arrow keys.
-
Selecting a Unit - Setting Parameters
The entry of a numeric value can be terminated by pressing a unit key on the front panel, selecting a
unit in the selection field next to the value or by clicking the rotary knob (= Enter). The unit is assigned
in different ways:
Terminating the value entry by selecting a unit in the units field
When the entry is terminated by selecting a unit in the units field next to the value, the selected unit is
assigned, e.g. sym/s (for list selection see next section).
+
yields
Terminating the value entry with Enter
If an entry is terminated by clicking the rotary knob (= Enter) or with the
ENTER key, the unit displayed
in the entry field next to the value is assigned (in the example ksym/s).
+
yields
.