Editors R&S SMB
1407.0812.62 3.18 E-2
Editors
The R&S SMB provides user-friendly editors for defining lists. Lists containing frequency and level value
pairs are used for the user-defined level correction.
The lists are saved to files and may thus have any length. The file name of the lists and the directory to
which the files are saved are user-selectable. The file prefix is different for each list type and is
permanently assigned by the system (see section "File Management", page 3.21).
List Editor
The User Correction menu provides the list editor for defining the frequency/level value pairs. The
associated buttons call up the list editor.
• The selected list is displayed. If no list has been selected, a blank list of only one row is displayed.
• The value pairs are entered in the Frequency/Hz and Power/dBm table columns. A blank row is
inserted at the end of the list.
• New rows can be inserted anywhere in the table by means of the Insert Row(s)... button.
• After the list has been edited, i.e. changed, it can be saved under its current name by means of the
Save button, or under a new name by means of the Save as... button. Only complete value pairs are
taken into consideration; rows containing an entry in only one column are ignored.
• An existing list can be edited in the insert or overwrite mode.
• A new list can be created under a new name either by generating a blank file in the File Select
menu (see section "File Management", page 3.21) or by changing an existing list which will then be
saved under a new name.
To Next Page
Loading...
