Rohde & Schwarz SMB 100a - USB Settings - Setup-Environment; Display-Keyboard Settings - Setup-Environment

R&S SMB General Instrument Settings
1407.0806.32 4.15 E-2
USB Settings - Setup-Environment
The USB Mass Storage Settings... menu allows to activate or deactivate connected USB mass
storage devices. It is opened using the SETUP or MENU key under Environment.
Mount USB Mass Storage
Device
Activates a connected USB mass storage device (memory stick,
external harddisk or CD-ROM). Only one device can be connected at
a time.
Remote-control command: n.a.
Unmount USB Mass
Storage Device
Deactivates a connected USB mass storage device (memory stick,
external harddisk or CD-ROM). The interface is protected against
unadverted input
Remote-control command: n.a.
Display-Keyboard Settings - Setup-Environment
The Display and the Keyboard Settings... menu provides access to the settings for the display and an
external keyboard. It is opened using the SETUP or MENU key under Environment. The keyboard is
connected via an USB interface.
Screen Saver
Activates/deactivates the screen saver of the instrument display. If
activated, the display lamp is shut off when no entries via front panel,
external mouse or external keyboard are made for a period of time
(Wait Time). The screen saver prolongs the life time of the display
lamp.
This mode is recommended for preserving the display especially if the
instrument is exclusively operated via remote control.
Remote-control command:
DISP:PSAV:STAT ON
Wait Time
Enters the idle time that must elapse before the display lamp is shut
off when no entries are made.
Remote-control command:: DISP:PSAV:HOLD 10