General Instrument Settings R&S SMB
1407.0806.32 4.14 E-2
We recommend that connection of the instrument to the network be
coordinated with the network administrator. Connection errors may
affect the entire network.
Remote-control command:
SYST:COMM:IPAD:NETW:GAT 456
DNS Server Address Mode
Selects if the DNS server address is assigned automatically or
manually.
The selection is only accepted after the Accept button is pressed.
In case of manual input of DNS server address we recommend that
connection of the instrument to the network be coordinated with the
network administrator. Connection errors may affect the entire
network.
Auto (DHCP)
The DNS server address is assigned automatically.
The network used must support automatic
assignment of address (DHCP) in order to use this
function.
Remote-control command:
SYST:COMM:NETW:DNS:MODE AUTO
Static
The DNS server address is assigned manually.
Remote-control command:
SYST:COMM:NETW:DNS:MODE STAT
Preferred DNS Server
Only for Static mode.
Enters the preferred DNS server address manually.
The new entry is only accepted and the preferred DNS server address
changed after the Accept button is pressed.
Remote-control command:
SYST:COMM:NETW:DNS:PREF 7.8.9.10
Alternate DNS Server
Only for Static mode.
Enters the alternate DNS server address manually.
This server is used if the DNS server specified in Preferred DNS
Server is unreachable.
The new entry is only accepted and the alternate DNS server address
changed after the Accept button is pressed.
Remote-control command:
SYST:COMM:NETW:DNS:ALT 7.8.9.10
To Next Page
Loading...
