Setting Parameters R&S SMB
1407.0812.62 3.12 E-2
Function Front panel PC keyboard Mouse
Switches on/off
Press rotary knob, ENTER
or TOGGLE ON OFF key.
Press Enter key. Click check box or button.
Selecting and Exiting a Menu Area - Setting Parameters
Some menus are organized in areas. The cursor can be moved either only within an area or between
the higher-level menu areas. This applies to the File Select menus when files are saved or loaded.
When the menu is called, one of the menu areas is highlighted by a blue frame.
• Another menu area can be selected (highlighted) by means of the rotary knob or the arrow keys.
• Clicking the rotary knob (= Enter) moves the cursor to the highlighted menu area. When the cursor is
placed on a lower-level area in the menu, the area is highlighted by a grey frame. The currently
selected item is printed on a blue background (in the example the selected directory).
The rotary knob and the arrow keys up/down move the cursor only within the grey-framed area.
• Clicking the rotary knob (= Enter) terminates the setting, i.e. selection of a file. The cursor is either
set on the next higher menu level or the menu is closed as in our example.
• The left/right cursor keys first shift the entry focus within the menu range form left to right (or vice
versa); in the example, from the directory tree to the file list. Press again and the entry focus is
shifted up one menu level.
• Clicking the rotary knob (= Enter) performs a setting.
In the example of the File Select menu, this is the display of the subdirectories if a directory is
marked and, if a file is marked, the selection of this file. After a file has been selected, the menu
closes automatically.
To Next Page
Loading...
