Display R&S SMB
1407.0812.62 3.8 E-2
Example:
The symbols indicate the input for the external pulse signal on the instrument
rear panel.
Menu Structure - Display
The parameters are set in the menus. Menus are called either via the function blocks in the diagram or
by means of the MENU key. The menus are displayed on top of the block diagram. If the menu buttons
assign menu-specific functions to the softkeys, the Winbar is hidden.
This section describes the menu structure. Menu operation is described in section "Menu Operation",
page 3.17, the setting of parameters in section "Setting Parameters", page 3.10.
The menus are in Windows format. They differ in details depending on their function but they consist of
the same main elements.
Menu header
The header line contains the name of the menu
(e.g. Frequency / Phase) and the button for closing
the menu. The button can be operated with the
mouse. For operation from the front panel, the
CLOSE key can be used.
The remaining menu area is variable and comprises various fields for setting parameters.
Each of the setting fields is assigned a parameter name. The kind of setting varies depending on the
parameter to be set.
Entry field
A numeric value (e.g. frequency offset) or an
alpha-numeric value (e.g. file name) can be
entered in this field.
To Next Page
Loading...
