R&S SMB Setting Parameters
1407.0812.62 3.13 E-2
• The
ESC key moves the cursor to the next higher menu level.
Function Front panel PC keyboard Mouse
Selects a menu area Select menu area using the
rotary knob or the arrow keys.
Press the rotary knob or the
ENTER key.
Rotary knob and arrow keys
up/down move the cursor
only within the selected menu
area.
Select menu area using the
arrow keys. Press the Enter
key.
The arrow keys up/down
move the cursor only within
the selected menu area.
-
(The menu area is selected
by selecting an entry.)
Exits a menu area
Press the ESC key.
Rotary knob or arrow keys
move the cursor between
different menu areas.
Press the Enter key.
The arrow keys move the
cursor between different
menu areas.
-
(The menu area is exited by
setting the cursor on an item
outside the area).
Entering a Value - Setting Parameters
Numeric and alphanumeric values can be edited in the entry fields. In the overwrite editing mode is
used.
Numeric values can either be newly entered or the existing value can be varied. Incorrect entries are
cleared with the
BACK SPACE key.
• Entering a new value:
A click on a numeric key activates the editing mode. The previous value is cleared and the new
value can be entered.
• Variation:
Clicking the rotary knob (= Enter) activates the editing mode. Set the cursor to the left of the number
to be changed using the left/right arrow keys. The value at the cursor position is varied. An increase
or decrease of the value depends on the cursor used (up/down) or on the direction of rotation of the
rotary knob.
Alphanumeric values can be newly entered (e.g. file name).
To Next Page
Loading...
