Putting into Operation R&S SMB
1407.0812.62 1.14 E-2
Setting up the Instrument
WARNING
Risk of injury and instrument damage.
Safe operation with support feet!
• Stacked instruments may slip off.
Secure stacked instruments against slipping (e.g. by locking the feet to the
top of the front-panel frame).
The feet must be fully folded in or folded out. Only then a stable position of the
instrument and reliable operation can be ensured. The uniform pressure on the
folded-out feet must not exceed 500 N (weight of instrument and of equipment
stacked on top).
• When the instrument with expanded feet, the feet might collapse and fold in.
Do not shift the instrument with the feet out.
<500N
Cleaning the Outside and Storing
What is necessary is essentially the cleaning of the instrument.
ATTENTION
Instrument damage caused by cleaning agents!
Cleaning agents contain substances that may damage the instrument, e.g. solvent-
containing cleaning agents may damage the front panel labeling or plastic parts.
Never use cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or
other substances.
The outside of the instrument is suitably cleaned using a soft, line-free dust cloth.
EMC Safety Precautions
To avoid electromagnetic interference, only suitable, double shielded signal and control cables must be
used. USB devices must keep within permissible EMI limits.
To Next Page
Loading...
