R&S SMB File Management
1407.0812.62 3.21 E-2
Function Front panel PC keyboard Mouse
Scroll
Move indicated help window
area using the rotary knob
and the arrow keys
Move indicated help window
area using the arrow keys
Click the scroll bar and move
to the desired position.
Select an item in the table
of contents
The help page of the item is
displayed.
Select Content in the help
window using the arrow keys
and activate by clicking the
rotary knob or the ENTER
key.
Select the desired item using
the rotary knob or the arrow
keys up/down and activate by
clicking the rotary knob or the
ENTER key.
Select Content in the help
window using the arrow keys
left/right and activate with the
Enter key.
Select the desired item using
the arrow keys and activate
with Enter.
Click Content
Click item.
Select an index term
The help page of the term is
displayed.
Select Index in the help
window using the arrow keys
and activate by clicking the
rotary knob or the ENTER
key.
Select the desired item using
the rotary knob or the arrow
keys up/down and activate by
clicking the rotary knob or the
ENTER key.
Select Index in the help
window using the arrow keys
left/right and activate with the
Enter key.
Select the desired item using
the arrow keys and activate
with Enter.
Click Indext
Click item.
File Management
The R&S SMB uses files to save all instrument data, i.e. system and user data. The user data includes
saved instrument settings and lists for the user correction.
The files are stored in the internal memory of the instrument or on a USB memeory stick. The /var
directory can be used to save user-defined data; any subdirectory structure can be created on /var.
Some default subdirectories are predefined, but can be changed at any time.
The /opt directory is a protected and therefore unaccessable system directory. The files on this directory
contain data that must not be changed. Therefore, this directory should not be accessed, since
reconstruction of the system partition will lead to data loss. To prevent inadvertent deletion or
overwriting of system files, this directory is not specified in the file menus.
Files can be exchanged via a memory stick. The memory stick has to be connected to the USB
interface and accessed via the File menu.
The files are accessed in a File Select window in the individual menus. Depending on the data type, a
file can either be selected or it can be selected and saved:
- Instrument settings can be saved and loaded. In case of saving, the current setting is saved to the
specified file.
- Lists, e.g. user correction lists, can be loaded. They can be generated either externally or internally.
For internal generation, a new list must be created in the File Select window which will then be
edited in the list editor of the individual menu.
To Next Page
Loading...
