Command Description R&S SMB
1407.0806.32 6.12 E-2
FORMat:SREGister ASCii | BINary | HEXadecimal | OCTal
The command determines the numerical format which is returned when the status registers are
queried.
Parameters: ASCii
'the register content is returned as a decimal number.
BINary
'the register content is returned as a binary number. #B is placed in front of the
number.
HEXadecimal
'the register content is returned as a hexadecimal number. #H is placed in
front of the number.
OCTal
'the register content is returned as an octal number. #Q is placed in front of
the number.
Example:
FORM:SREG HEX
'the register content is returned as a hexadecimal number.
*RST value Resolution Options SCPI
ASCii - Compliant
To Next Page
Loading...
