R&S SMB Command Description
1407.0806.32 6.27 E-2
[SOURce:]CORRection:CSET:DATA:POWer -40dB ... 6dB {,-40dB ... 6dB}
The command transfers the level data to the table selected with :CORRection:CSET:SELect.
*RST does not affect data lists. .
Example:
CORR:CSET ‘var/lists/ucor/ucor1'
'selects the table ucor1.
CORR:CSET:DATA:POW 1dB, 0.8dB, 0.75dB,...
'enters the level values in the table ucor1.
*RST value Resolution Options SCPI
- - - Device-specific
[SOURce:]CORRection:CSET:DATA:POWer:POINts?
The command queries the number of level values in the selected table.
The command is a query command and therefore has no *RST value.
Example:
CORR:CSET ‘var/lists/ucor/ucor1'
'selects the table ucor1.
CORR:CSET:DATA:POW:POIN?
'queries the number of level values in the table ucor1.
Response: 440
'the table ucor1 contains 440 level values.
*RST value Resolution Options SCPI
- - - Device-specific
[SOURce:]CORRection:CSET:DELete <table name>
The command deletes the specified table.
The lists are stored with the fixed file extensions *.uco in a directory of the user's choice. The
directory applicable to the commands is defined with the command MMEMory:CDIR. A path can
also be specified in command :SOUR:CORR:CSET:CAT?, in which case the file in the specified
directory is deleted.
The command is an event and therefore has no *RST value. The numerical suffix under SOURce is
irrelevant.
Example:
MMEM:CDIR ‘var/lists/ucor’
'selects the directory for the user correction files.
CORR:CSET:DEL 'UCOR1'
'deletes the table ucor1.
*RST value Resolution Options SCPI
- - - Device-specific
To Next Page
Loading...
