Command Description R&S SMB
1407.0806.32 6.50 E-2
Command Parameters Default
unit
Remark
[SOURce:]LIST:DEXChange:AFILe:SEParator:COLumn TABulator | SEMicolon |
COMMa | SPACe
[SOURce:]LIST:DEXChange:AFILe:SEParator:DECimal DOT | COMMa
[SOURce:]LIST:DEXChange:EXECute No query
[SOURce:]LIST:DEXChange:MODE IMPort | EXPort
[SOURce:]LIST:DEXChange:SELect <list mode file>
[SOURce:]LIST:DWELl 1 ms ... 1 s s
[SOURce:]LIST:FREQuency 300kHz..RF
max
{,
300kHz..RF
max
} | block data
Hz RF
max
depending on
model
[SOURce:]LIST:FREQuency:POINts? Query only
[SOURce:]LIST:INDex:STARt 0 ... list length
[SOURce:]LIST:INDex:STOP 0 ... list length
[SOURce:]LIST:LEARn No query
[SOURce:]LIST:MODE AUTO | STEP
[SOURce:]LIST:POWer -145 ... 30 dBm {, -145 ...
30 dBm} | block data
dBm
[SOURce:]LIST:POWer:POINts? Query only
[SOURce:]LIST:RESet No query
[SOURce:]LIST:SELECT <list name>
[SOURce:]LIST:TRIGger:EXECute No query
[SOURce:]LIST:TRIGger:SOURce AUTO | IMMediate |
SINGle|BUS | EXTernal
[SOURce:]LIST:CATalog?
The command requests a list of available lists. The individual lists are separated by commas.
The lists are stored with the fixed file extensions *.lsw in a directory of the user's choice. The
directory applicable to the commands is defined with the command MMEMory:CDIR. A path can
also be specified in command SOUR:LIST:CAT?, in which case the files in the specified directory
are read.
The command is a query command and therefore has no *RST value.
Example:
MMEM:CDIR ‘var/lists/listmode’
'selects the directory for the list mode files.
LIST:CAT?
'queries the available lists.
Response: 'list1,list2'
'the lists list1 and list2 are available.
*RST value Resolution Options SCPI
- - Device-specific
To Next Page
Loading...
