R&S SMB Command Description
1407.0806.32 6.61 E-2
SOURce:MODulation Subsystem
This subsystem contains the command for switching on/off all modulations.
Command Parameters Default unit Remark
[SOURce:]MODulation[:ALL]:STATe ON | OFF
[SOURce:]MODulation[:ALL]:STATe ON | OFF
The command switches the modulations on and off. A subsequent command
:SOUR:MOD:ALL:STAT ON restores the status that was active before the last switch-off. MOD OFF
is displayed in the info line of the header next to the Level field.
Example:
MOD:STAT OFF
'switches off all active modulations
*RST value Resolution Options SCPI
ON - - Device-specific
To Next Page
Loading...
