Rohde & Schwarz SMB 100a - Page 257

R&S SMB Command Description
1407.0806.32 6.65 E-2
[SOURce:]PM:SOURce EXT | INT | INT,EXT
The command selects the modulation source for phase modulation. INT is the internal modulation
source which is configured in the SOURce:LFOutput subsystem. The external analog signal is input
at the MOD EXT connector. Internal and external modulation source can be selected at the same
time."
Example:
PM:SOUR INT
'selects the internal modulation source.
*RST value Resolution Options SCPI
INTernal - Compliant
[SOURce:]PM:STATe ON | OFF
The command activates/deactivates phase modulation.
Activation of phase modulation deactivates frequency modulation.
Example:
PM:STAT ON
'activates PM modulation.
*RST value Resolution Options Correlation SCPI
OFF -
PM:STATe ON deactivates
frequency modulation.
Compliant