R&S SMB Example of Setup
1407.0812.62 2.5 E-2
Step 2: Select and activate AM modulation
Select the Mod block by turning the rotary knob.
Press the rotary knob to open the menu where the
modulation can be selected (different modulation
modes are available depending on the options
installed).
The Amplitude Mod... menu is the first menu and
is highlighted per default.
Press the rotary knob to open the Amplitude
Modulation menu.
Select the AM Depth parameter by turning the
rotary knob, and then enter the desired AM depth
with the aid of the numeric keypad and the unit
keys.
To Next Page
Loading...
