Operating Concept R&S SMB
1407.0812.62 3.2 E-2
amplitude modulation can be activated in this way. The menus of the highlighted function blocks can be
called by clicking the rotary knob or by pressing the
ENTER key.
The signal flow between the function blocks and the employed inputs and outputs are also shown.
The menu tree can be opened and closed with the
MENU key. The menu tree is organized in the same
way as the directories under Windows. The function blocks correspond to the first directory level, the
menus to subdirectories.
Operation corresponds to the Linux concept
To offer the user a familiar environment, operation is very similar to operation of Linux user interfaces.
All menus and tables are made up of known elements, e.g. selection lists,
check boxes,
or entry fields.
A blue frame indicates that the selected item is active. In the highlighted element, entries can be made.
Most of the settings can be easily made with the rotary knob
Operation is possible via front-panel keys, an external keyboard and the mouse. Most of the settings
can be made with the rotary knob:
• Turning the rotary knob shifts the entry focus to the desired element.
To Next Page
Loading...
