User Documentation R&S SMB
1407.0812.62 0.2 E-2
Documentation CD-ROM
The CD-ROM provides the complete user documentation for the
Signal Generator:
- The online help system (*.chm).
- The complete operating manual and service manual in printable
form (*.pdf).
- The data sheet (brochure and specifications) in printable form.
- Links to different useful sites in the R&S internet.
Note: Please use the ADOBE
Acrobat
Reader for PDF files
and the browser Internet Explorer
4.0 for the HTML
help.
Optional Documentation
The printed version of the operating and service manual provides
the contents of the quick start manual plus the complete reference
and the service information for the Signal Generator. This manual
can be ordered as an option (stock no. 1407.0806.32 (English - A4
format) or 1407.0806.39 (English - letter format )); see ordering
information in the data sheet.
Note: The CD-ROM contains the *.pdf version of the manuals.
Manual Control
The operating manual contains comprehensive information about
the instrument functions and remote control, in addition to the
chapters of the quick start guide. It includes information about
maintenance of the instrument and about error detection listing the
error messages which may be output by the instrument. It is sub-
divided into 10 chapters:
The data sheet informs about specifications and character-
istics of the instrument.
Chapter 1 describes the control elements and connec-
tors on the front and rear panel as well as
all procedures required for putting the in-
strument into operation.
Chapter 2 gives an introduction to the operating con-
cept and typical applications of the
R&S SMB.
Chapter 3 describes key operating modes, the struc-
ture of the graphical interface and the prin-
ciples of manual control.
To Next Page
Loading...
