User Correction R&S SMC100A
1411.4060.32 4.62 E-1
Edit
Calls a selection of possible actions described
below.
Insert Row
Inserts a new row before the marked row.
Remote-control command: n.a.
Insert Range
Inserts new rows before the marked row. The
number of rows to be inserted can be defined in an
entry window.
Remote-control command: n.a.
Fill....
Opens a sub menu for defining a set of list values
to be automatically entered in the ucor list.
The start line and the number of rows to be filled
are defined under From and Range.
The column to be filled is selected under Select
column to fill. Depending on the selection here,
the default for start, end, and increment value are
set. As the settings are interdependent, a change
of one parameter may result in the automatic
change of one or more of the other parameters.
The filling of the column with the selected value
settings is started with button Fill.
Remote-control command: n.a.
Fill With Sensor
Calls the menu to activate the filling of the user
correction list with level values acquired by the
selected power sensor (see section "Filling the
Correction List with Power Sensor Measurement
Data").
To Next Page
Loading...
