Command Description R&S SMC100A
1411.4060.32 6.30 E-1
SENSe:UNIT[:POWer] DBM | DBUV | WATT
The command selects the unit used for result query with command READ. The power sensor
provides the measured value in Watt. In which unit the measured value is returned is selected here
and might be either Watt, dBm or dBuV.
Example:
"SENS:UNIT DBM"
'selects unit dBm for the measured value returned by command READ.
READ?
Response: 7.34
'7.34 dBm are measured by the sensor.
*RST value Resolution SCPI
DBM - Device specific
To Next Page
Loading...
