Rohde & Schwarz SMC100A - Page 291

R&S SMC100A Command Description
1411.4060.32 6.89 E-1
SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname ‘string’
The command enters the individual computer name of the R&S SMC. The entry is only activated
after sending command SYST:COMM:NETW:COMM:SET.
Note:
The hostname can only be changed after deactivating protection level 1 (command
SYSTem:PROTect<n>:STATe OFF, password)
Example:
SYST:COMM:NETW:HOST ‘SMC’
'enters the individual computer name of the R&S SMC
SYST:COMM:NETW:COMM:SET ON
'activates the change of the hostname.
*RST value Resolution Options SCPI
- Device-specific
SYSTem:COMMunicate:NETWork:COMMon:SET
The command activates the hostname setting (Command SYST:COMM:NETW:COMM:HOST).
The command triggers an event and therefore has no *RST value and no query form.
Example:
SYST:COMM:NETW:COMM:SET
'activates a change of the hostname.
*RST value Resolution Options SCPI
- - Device-specific
SYSTem:COMMunicate:NETWork:DNS:ALTernate 0.0.0.0 .. FF.FF.FF.FF
The command sets the alternate DNS server address manually.
Example:
SYST:COMM:NETW:DNS:MODE STAT
' the DNS server address is assigned manually.
SYST:COMM:NETW:DNS:ALT 7.8.9.10
'sets the IP address of the alternate DNS server
SYST:COMM:NETW:COMM:SET ON
'activates the above settings.
*RST value Resolution Options SCPI
- - Device-specific